Product Family Overview -

Triplex Pumps

• Pressure : Up to 22,500 PSI
• Capacity : From 1 to 2900 GPM
• Robust
• Lowest Cost of Ownership
• Easy to Clean
• Very Suitable for High Pressures
• Constant Displacement
• High Overall Efficiency
• Very Low Maintenance
• API 674 Specification

• Wepuko's proprietary packing technology enables our pumps to run for 3 or 4 times as long as competing designs before packings need adjustment or replacement.
• Special Primary, Secondary and Intermediate seal designs, application specific lube and flushing systems virtually eliminate contamination, dry starts or leakage.
• Wepuko pumps are designed for true 24-7 operation.
• Wepuko valves use a minimum of moving parts and linear designs to improve efficiency and reduce dead area.
• Robust drive end components eliminate broken cranks, rods and bearings.
• Reliable drive arrangements require virtually no maintenance.
• Wepuko Piston Cylinder Units (PCU) are quick and easy to replace.
• Wepuko's special integral Load/Unload device means that unload valves downstream of the discharge are not required - reducing shock, complexity and maintenance.
• Wear parts have extremely long lifetimes - with spares available in excess of 15 years.

Available Accessories :

• Load/Unload Device
• Suction Valve Lifting Device
• Bypass Valves
• Pulsation Damping
• Tanks, Frames
• Measuring Instruments
• Motors, Cabinets, Controls, Gearing

Operation of Triplex Pump

Wepuko Triplex Pumps are used for Water Glycol systems, Press Drives, Injection Units, Glycol Dehydration, Supercritical Fluids, Methanol Injection, Ethanol, Hydrocarbons, Ammonia, Carbamate, Urea, Carbon Dioxide (CO2), Brine, Toxicants, Sea Water, Slurries, Fatty Acids and many, many others.

Cutaway View of Triplex Pump

See the power range below for specific capacities and pressures :

Power Range Table for Wepuko Triplex Pumps

Construction:

Basically, the 3 plunger (Triplex) pump consists of two main assemblies:

• The Power End
• The Fluid End

The internal layout and operation of the Power End is very similar to that of a 3 cylinder gas engine.

The Internal layout for each series is designed and proportioned according to the rod load. The power end serves as a structural component.

Triplex Plunger Pumps are capable of pumping almost any fluid. Available in a wide variety of configurations to meet the needs of many applications. Heavy duty and easy to maintain. They are designed especially for high-pressure, low maintenance, long life applications. The materials for the fluid end are specifically selected according to the liquid media. Cooling, heating or flushing of the fluid end is also available. The power end is supplied complete with integrated oil lubrication.

Bareshaft pumps or various drive options are available : Click for examples of available Drive Configurations

ABOUT WPE

DISTRIBUTORS

SITE MAP

OIL

WATER

PROCESS SYSTEMS

APPLICATIONS

ANY PUMPABLE MEDIA

CAPABILITIES

MODERNIZE

CONTROLS

SOFTWARE

PRESS DRIVES

MANIPULATORS

VALVES

REFERENCES